Faculty Information - Shikida Mitsuhiro |

Shikida Mitsuhiro

Department / Course

Hiroshima City University Graduate School Graduate School of Information Sciences Major in Biomedical Information Sciences

Hiroshima City University Faculty of Information Sciences Department of Biomedical Information Sciences

Job Professor

Academic conference presentation
2024/10	Facile In-Tube-Center Packaging of Flexible Airflow Rate Microsensor for Simultaneous Respiration and Heartbeat Measurement (Proc. IEEE SENSORS 2024)
2024/10	Single-Step Laser Fabrication of 3D Free-Standing Origami MEMS Thermal Sensor (Proc. IEEE SENSORS 2024)
2024/06	Flexible MEMS Thermal Sensor Using Cost-Effective Metallization: Al (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/06	Hybrid Integration of Airflow Sensor and CO2 Sensor for Respiration Measurement (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/06	Integrating Flexible Airflow Sensor into Tracheal Intubation Tube for Respiration Monitoring During Canine Tartar Removal (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/06	Investigation on Calibration Methodology for Wearable Piezoelectric Sensor Thread Using Airflow Sensor for Quantitative Respiration Measurement (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/06	Safety Enhancement Consideration of Pitot Tube Sensor Probe Towards Airflow Measurement of Exhalation Inside Pulmonary Airway (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/06	Slip Joint Adaptor Enabling Respiration Airflow Measurement in Tracheal Intubation Tube (11th Asia-Pacific Conference of Transducers and Micro-Nano Technology)
2024/03	Facile Packaging for Fiber-Shaped Flexible MEMS Thermal Accelerometer (11th IEEE International Symposium on Inertial Sensors & Systems)
2023/11	Embedding Airflow Sensing Function in Balloon Catheter for Respiration Measurement in Bronchus Region Inside Lung (36th International Microprocesses and Nanotechnology Conference)
2023/11	Laser Processing for Time Response Enhancement of Flexible MEMS Thermal Sensors (36th International Microprocesses and Nanotechnology Conference)
2023/11	Tracheal Intubation Tube with Embedded Flow Sensor for Respiration and Heartbeat Monitoring During Canine Tartar Removal (36th International Microprocesses and Nanotechnology Conference)
2023/06	Calibration method for wearable sensor using airflow at mouth for quantitative monitoring of respiration and heartbeat (22nd International Conference on Solid-State Sensors, Actuators and Microsystems)
2023/06	In-tube-center packaging of flexible MEMS airflow-rate sensor and its sensitivity enhancement (22nd International Conference on Solid-State Sensors, Actuators and Microsystems)
2023/06	Simultaneous airflow and pressure measurements based on pitot tube for evaluation of expired air inside lung airway (22nd International Conference on Solid-State Sensors, Actuators and Microsystems)
2022/06	Wireless MEMS Thermal Flow Sensor System Integrated on Medical Mask for Emergency Medical Treatment (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2021/06	MEMS flow sensor capable of measuring multi-vital signs of respiration, heart rate, and body temperature (21st International Conference on Solid-State Sensors, Actuators and Microsystems)
2021/03	MEMS devices in vital signs measurements for medical application (13th International Symposium on Advanced Plasma Science and its Applications for Nitrides and Nanomaterials 14th International Conference on Plasma-Nano Technology & Science (ISPlasma2021/IC-PLANTS2021))
2020/11	Development of probe-shaped pressure sensor device for measuring pressure drop at airway in lung (33nd International Microprocesses and Nanotechnology Conference)
2020/11	Development of spear-shaped tip-separable microneedle device with guide tube for transdermal drug delivery system (33nd International Microprocesses and Nanotechnology Conference)
2020/11	Development of stent sensor device with protective biodegradable shell structure (33nd International Microprocesses and Nanotechnology Conference)
2020/11	Evaluation of MEMS thermal flow sensor in medical drip infusion system (33nd International Microprocesses and Nanotechnology Conference)
2020/01	Development of stent flow sensor device evaluating breathing property at airway in experimental animal under free move condition (IEEE Micro Electro Mechanical Systems Conference)
2019/10	Development of Breathing Monitoring System for Artificial Ventilator in Animal Experiment (32nd International Microprocesses and Nanotechnology Conference)
2019/10	Development of Thermal Flow Sensor for Respiration Measurement (32nd International Microprocesses and Nanotechnology Conference)
2019/09	A thermal flow sensor and its signal processing circuit integration onto flexible copper on polyimide substrate (45th International Conference on Micro & Nano Engineering)
2019/09	Flow sensor and stent integration for evaluating in-situ breathing property at airway in experimental animal (45th International Conference on Micro & Nano Engineering)
2019/09	Thermal flow sensor operated under 40 degrees Celsius for controlling small dosing rate in drip infusion system (45th International Conference on Micro & Nano Engineering)
2019/06	Four-sided tip-separable micro-needle device with large barb formed by anisotropic wet etching for trans-dermal drug delivery system (20th International Conference on Solid-State Sensors, Actuators and Microsystems)
2019/06	Integration of MEMS flow sensor, electrical wiring, and tube structure onto copper on polyimide substrate (20th International Conference on Solid-State Sensors, Actuators and Microsystems)
2019/06	Micro-machined catheter flow sensor systemization for in-situ breathing and optical imaging measurements in bronchus region in lung system (20th International Conference on Solid-State Sensors, Actuators and Microsystems)
2018/11	Development of three layered tube type flow sensor for human respiration measurement (31st International Microprocesses and Nanotechnology Conference)
2018/11	Micro-machined flow sensor formed on copper on polyimide substrate and its respiration measurement application (31st International Microprocesses and Nanotechnology Conference)
2018/06	Breathing monitoring by energy-less respiration sensor based on thermo-sensitive film (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2018/06	Integration Of Temperature Compensation Sensor With Flexible Flow Sensor Based On Cu On Polyimide Substrate (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2018/06	Integration of temperature sensor onto MEMS flow sensor for detecting both breathing and body temperature information (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2018/06	MEMS Flow Sensor Integration into Tracheal Tube Device and its Application to Respiration and Heartbeat Signal Detection in Infant (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2018/06	Metal plastic forming by mechanical Si structure indentation for producing metal mold master applied for high density needle fabrication (Tech. Dig. of Asia-Pacific Conference on Transducers and Micro-Nano Technology)
2018/01	Characteristics resonance features of SOI-CMOS-compatible silicon nanoelectromechanically doubly-clamped beams up to 330 MHz (Tech. Dig. of IEEE Micro Electro Mechanical Systems Conference)
2017/09	Development of catheter flow sensor for breathing measurements at different levels of tracheobronchial airway (Eurosensors2017)
2017/09	Development of small-footprint thermal sensor detecting airflow at mouth in baby (Eurosensors2017)
2017/09	Fabrication of sharp tip-separable microneedle device for trans-dermal drug delivery systems (Eurosensors2017)
2017/09	Micromachined tube type thermal flow sensor for adult-sized tracheal intubation tube (Eurosensors2017)
2017/09	RF characterisation of CMOS-compatible Silicon-on-Insulator Nanoelectromechanical Resonators (MNE2017)
2017/06	Integration of flow sensor and optical fiberscope for in-situ breathing and surface image evaluations in small airway (Tech. Dig. of 19th International Conference on Solid-State Sensors, Actuators and Microsystems)
2016/11	Breathing signal analysis of mouse during drug inhalation (29th International Microprocesses and Nanotechnology Conference)
2016/11	Effect of guide tube length on sensor output in inspired airflow measurement (29th International Microprocesses and Nanotechnology Conference)
2016/10	Development of cylinder hollow structure with flow sensor by film transfer technology (Proccedings of IEEE Sensors 2016)
2016/10	Embedded wire-electrode into biodegradable microneedle device for brain-machine interface (Proccedings of IEEE Sensors 2016)
2016/10	Measurement of heartbeat signals from airflow at mouth in rat by catheter flow sensor (Proccedings of IEEE Sensors 2016)
2016/06	Insertion of tip-separable microneedle device for trans-dermal drug delivery systems (Tech. Dig. of Asia-Paciific Conference on Transducers and Micro-Nano Technology)
2016/06	Response time shortening in thermal catheter flow sensor (Tech. Dig. of Asia-Paciific Conference on Transducers and Micro-Nano Technology)
2016/06	Smooth surfaced shear stress sensor with high time resolution (Tech. Dig. of Asia-Paciific Conference on Transducers and Micro-Nano Technology)
2016/04	Micro flow sensor integration onto basket forceps for pulmonary function evaluation (Proceedings of the 11th IEEE Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS))
2016/01	Detection of kinetic heartbeat signals from airflow at mouth by catheter flow sensor with temperature compensation (Tech. Dig. of IEEE Micro Electro Mechanical Systems Conference)
2016/01	Fabrication of smooth-surfaced flexible thermal sensor for detecting wall shear stress (Tech. Dig. of IEEE Micro Electro Mechanical Systems Conference)
2015/11	Development of micro-needles based on MEMS technologies for trans-dermal drug delivery system (The 9th IEEE International Conference on Nano/Molecular Medicine and Engineering)
2015/11	Extraction of heartbeat signal from airflow at mouth by flow sensor (Proccedings of IEEE Sensors 2015)
2015/11	Responsible time shorting of flexible thermal flow sensor for medical applications (Proccedings of IEEE Sensors 2015)
2015/06	Basket forceps with flow sensor for evaluating breathing characteristics in small airway (Technical digest of The 18th International Conference on Solid-State Sensors and Actuators)
2015/06	Design principle of micro-mechanical probe for lateral-deflection-controlled friction force microscopy (JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE))
2015/06	Detection of both heartbeat and respiration signals from airflow at mouth using catheter flow sensor (Technical digest of The 18th International Conference on Solid-State Sensors and Actuators)
2015/06	Micro-machined micro-needles and their trans-dermal drug delivery system applications (Korea-Japan Joint Workshop on Micro Needles)
2015/06	Sharp tip-separable microneedle device for trans-dermal drug delivery systems (Technical digest of The 18th International Conference on Solid-State Sensors and Actuators)
2015/01	Vacuum cavity formation for high thermal isolation in flexible thermal sensor (Tech. Dig. of IEEE Micro Electro Mechanical Systems Conference)
2014/12	Measurement of wall shear stress in a boundary layer of a turbulent wall jet with two types of MEMS sensors (The 5th International conference on Mechanical Engineering)
2014/11	Flexible thermal MEMS flow sensor based on Cu on polyimide substrate (Proccedings of IEEE Sensors 2014)
2014/11	Implantable catheter flow sensor with legs in air passage for laboratory animal (Proccedings of IEEE Sensors 2014)
2014/11	Sharp needle tip formation based on triangular pyramidal structure (Proccedings of IEEE Sensors 2014)
2014/11	Wearable displacement sensor system based on elevating tube for measuring breathing pattern (Proccedings of IEEE Sensors 2014)
2014/06	Direct reduction of copper nanoparticles using femtosecond laser pulses copper micropattern (Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing, ICMP2014)
2014/06	Micromachined catheter flow sensor for measurement of breathing characteristics in a bronchial region (Tech. Dig. of Asia-Paciific Conference on Transducers and Micro-Nano Technology)
2014/06	Penetration capability of pyramidal shaped micro-needles into skin (Tech. Dig. of Asia-Paciific Conference on Transducers and Micro-Nano Technology)
2014/06	The effect of metal buffer layers on open-circuit voltage of thin-film thermoelectric modules (Proceedings of the JSME/ASME 2014 International Conference on Materials and Processing, ICMP2014)